1. Full automatic and easy to operate.
2. Siemens constrol system. The system has the function of helping information prompt and
fault diagnosis
The system can realize the function of statistics report and
printing
3. Precisional machine & Hi-steady in long time use.
3.1 The diameter tolerance of each piston of feed pump is
controlled within 5 microns, so that the difference of loading
quantity of each piston is minimized. This indicator has exceeded
similar levels abroad.
3.2 The high precision manufacture makes our company soft capsule
machine can suppress the suspension with solid content over 60%.
3.3. Rubber lubrication micro oil supply technology, so that the
oil consumption to the minimum. Lubricate with vegetable oil
without washing pills (without printing). The flow rate of oil
supply can be adjusted separately and automatically with the speed
of die rolling
3.4. The function of "formula card" with operation parameter
storage and call, spray body temperature, gelatin box temperature,
cold air temperature, rolling speed, oil supply flow rate, mold
parameters, dryer speed and other parameters can be stored one key,
call at any time
3.5. The lifting and lifting of the jet body is realized by the
cylinder, which does not need to be combined with the lifting and
feeding pump.
3.6 . The mold pressurization adopts the pneumatic way, avoids the
manual operation pressure size to vary from person to time, may
effectively protect the mold
3.7 The main machine is equipped with two sets of insulation gel
tank , so that when one tank is working properly, the other tank
can keep the heatting at the same time, and reduce the time of
transfer of the barrel.
4. Best seller machine from China.
5. Conforming to GMP.
6.Vegan material avaliable.
7. CE,ISO90001 certificate. Cable connector adopts IP65 protection grade, waterproof, oil
proof.
8. Formula service and technion service.
9. Special design according different filling material.
9.1 For the materials which are easy to oxidize and layering, the
method of circulating feeding can be chosen
9.2 Flow control measures, so that the lubricating oil supply is
stable and uniform, can be manually or according to the rolling
speed and other working conditions automatically adjust the oil
supply.
9.3 Different feeding forms can be used for oil and viscous
materials
10. Free test when visit our factory and FAT.
Fatory Requiremnt
Geltain room: cleanliness class 300,000, temperature 20~24℃, relative humidity
<60%.
If the original factory building is not high enough, pressure can
also be used to force the release of glue), the rubber tank needs
to build a rubber platform, platform height of 2 m..
The chemical glue room should be provided with floor drain, water
vapor discharge, should be led to the outdoor.
Chemical glue auxiliary machine room: can be self-made one room, can also be combined with the chemical
gel room in one room; there is steam in, water into the water out
Net glue washing and recovery room: cleanliness class 300,000, temperature 20~26, relative humidity
<60%. Floor drain, hot water
final drying Room: temperature should be 18~24℃, humidity 20~30%. The area is about
60 square meters.
In order to ensure a good process effect, the room is required for
horizontal laminar flow wind. The room stacked the trays on the
trolley.
Both the air tray and the trolley are made by the user. According
to the requirements of the plant environment, the user selects the
dehumidifier and purchases it.×× size ,40 pallets, can hold ten
thousand grains. According to machine output, pallet vehicles are
required
